M & ND Range Features:
· Resolution set by DIP switches up to 51,200 st/rev*
· Current programmable 0.3 to 8.2A*
· Advanced bipolar chopper drive
· Economic pricing
(* Dependent on drive selected)
M & ND Range Benefits:
· Simple and user-friendly
· High torque & speed
· Very high reliability
· Highly efficient
The M & ND Series stepper drives present a range
of state-of-the-art, microstepping drives combining
top-of-the-range performance with economic manufacturing
methods.
Utilising an advanced bipolar, constant current chopping
technique, the M & ND Series allow greater speed and power to be
obtained from the same motor compared with traditional
technologies such as L/R drives.
Patented current control technology allows coil
currents to be accurately controlled, resulting in drastically
reduced current ripple and motor heating.
These drives allow all 3X stepper motors from our smallest 20mm
motor to our largest 86mm to be fully exploited in your
application.
Drive manuals are available separately on request.
Part No.
Output Current
Supply Voltage
Microstep
Resolution
Suitable Motor Type
Weight
Size
Control Signals
A
V
Kg
mm*mm*mm
M542
1.0-4.2
DC(20-50)
2-128, 5-125
28-35-39-42-57-60
0.28
118*75.5*34
pul/dir, cw/ccw
single ended, differential
M752
1.8-5.2
DC(20-50)
2-256, 5-200
28-35-39-42-57-60
0.28
119*75.5*34
pul/dir, cw/ccw
single ended, differential
ND556
0.5-5.6
DC(18-50)
2-128, 5-125
28-35-39-42-57-60-86
0.28
120*75.5*34
pul/dir, cw/ccw
single ended, differential
M880A
2.8-7.8
DC(24-80)
2-256, 5-200
39-42-60-86
0.57
151*97*48
pul/dir, cw/ccw
single ended, differential
ND1182
0.7-8.2
AC(70-150)
2-128, 5-125
60-86
1.30
200*137*81
pul/dir, cw/ccw
single ended, differential
ND2282
0.45-8.2
AC(80-220)
2-50
60-86
2.00
202*167*63
pul/dir, cw/ccw
single ended, differential
DM SERIES
very low
noise/very high resolution
Digital
Stepper Drives
DM Range Features:
· Software configurable using tuning interface
· Programmable resolution to 102,400 st/rev
· Powerful 32 bit DSP Controller
· Anti-resonance circuitry
The high performance DM Series drives result from the use
of new, patented 32-bit DSP control technology. This results in such
advanced features as super-low stepping motor noise, anti-resonance,
low-speed ripple smoothing and low motor heating.
Each DM Series drive calculates it’s own natural system
frequency and applies a damping control algorithm for superior
anti-resonance and drastically reduced motor noise.
Motor noise can be dramatically reduced by up to 70% of
it’s original value.
主页
